P And L Of Wmm, Dbm And Bc Including Cleaning Of Rd Surface, Prime And Tack Coat And Road Marking For Surfacing Works From Km 30.00 To Km 65.00 On Road P K B Under 96 Rcc/45 Brtf Under Project Chetak

Work Description - P And L Of Wmm, Dbm And Bc Including Cleaning Of Rd Surface, Prime And Tack Coat And Road Marking For Surfacing Works From Km 30.00 To Km 65.00 On Road P-k-b Under 96 Rcc/45 Brtf Under Project Chetak

The Dte General Border Roads Organisation, through its Tender Inviting Authority, the Chief Engineer Project Chetak, C/o 56 APO, Bikaner, PIN 334006, invites eligible bidders for an Open Tender (Reference Number: CE (P) CTK/03/2026-27) for comprehensive civil works. The scope of work, estimated at a tender value of INR 33,97,00,000 (Thirty-Three Crore, Ninety-Seven Lakhs), entails the P&L (Provision and Laying) of WMM (Wet Mix Macadam), DBM (Dense Bituminous Macadam), and BC (Bituminous Concrete), including cleaning of road surface, prime and tack coat application, and road marking for surfacing works from KM 30.00 to KM 65.00 on Road P-K-B under 96 RCC/45 BRTF under Project Chetak. The project has a stipulated Period of Work of 180 days and a Bid Validity of 120 days. This tender was e-published and available for document download from June 11, 2026, at 05:30 PM, with the deadline for document download and bid submission set for July 08, 2026, at 06:00 PM. Bidders can commence bid submission from June 17, 2026, at 11:00 AM. A mandatory pre-bid meeting will be held on June 16, 2026, at 11:00 AM at HQ Chief Engineer Project Chetak, Bikaner, to address any queries. The technical bids will be opened on July 15, 2026, at 12:00 PM at HQ Chief Engineer Project Chetak, Bikaner. A fixed Earnest Money Deposit (EMD) of INR 15,00,000 (Fifteen Lakhs) is required, payable to the "Chief Engineer Project Chetak, C/O 56 APO" at SBI Bikaner, with provisions for EMD exemption allowed via BG/ST. There is no tender fee. The bidding process requires submission in two covers. The first cover (Technical/Prequalification) must include attested copies of tender conditions acceptance, bid securing declaration (for MSME), details of working capital, engineering establishment, EMD documentation, experience certificates for similar works, proofs of ownership/assured access to vehicles and equipment, performance and other required affidavits, integrity pact, available bid capacity, PAN card, and GST registration. The second cover (Finance) shall contain the Bill of Quantities (BOQ). Prospective bidders are strongly advised to refer to the comprehensive tender documents for complete details and compliance requirements.